Search
Search Criteria
Products meeting the search criteria
Model: CF1037
Dimensions: 12.00cm x 12.00cm x 0.00cm
Clamping fleece, an affordable mat, allowing you to carry out breakthrough milling on your vacuum table.5 clamping fleeces in each pack...
US$ 2.00
Popular
Model: PVC1000
Dimensions: 12.00cm x 12.00cm x 0.00cm
Coolant resistant, PVC Mats for use on our Grid tables where breakthrough milling is required.Each pack contains 5 mats...
US$ 10.00
Popular
Model: SM1000
Dimensions: 20.00cm x 10.00cm x 0.00cm
Our sintered mats are a harder wearing rubber mat than the clamping fleece, for use on routers with a hole matrix vacuum table where breakthrough milling or routing is required...
US$ 10.00
Model: VT2012-ST
Dimensions: 210.00mm x 120.00mm x 21.00mm
The 2012 ST vacuum table is a suitable beginner model for milling wood or plastics. It is not recommended for precise metal milling, instead a minimum would be our SEAL Series due to its increased rigidity with an aluminium base plate. A vacuum cleaner connector is provided which can be adjusted between 1" and 1.75".
..
US$ 100.00
Model: VT2016-ST
Dimensions: 210.00mm x 160.00mm x 21.00mm
The 2016 ST vacuum table is a suitable beginner model for milling wood or plastics. It is not recommended for precise metal milling, instead a minimum would be our SEAL Series due to its increased rigidity with an aluminium base plate. A vacuum cleaner connector is provided which can be adjusted between 1" and 1.7..
US$ 120.00
Popular
Model: VT2020-ST
Dimensions: 210.00mm x 200.00mm x 21.00mm
The 2020 ST vacuum table is a suitable beginner model for milling wood or plastics. It is not recommended for precise metal milling, instead a minimum would be our SEAL Series due to its increased rigidity with an aluminium base plate. A vacuum cleaner connector is provided which can be adjusted between 1" and 1.75".
..
US$ 130.00
Popular
Model: VT2012-SEAL
Dimensions: 210.00mm x 120.00mm x 29.00mm
The vacuum table 2012 SEAL is a further development of its ST Series counterpart. A material of polyethylene plastic is sandwiched
between top and base plates of cast aluminium, giving the table additional rigidity. Although best results are achieved using a dedicated vacuum pump the SEAL series can be used with a..
US$ 150.00
Popular
Model: VT2616-ST
Dimensions: 270.00mm x 160.00mm x 21.00mm
The 2616 ST vacuum table is a suitable beginner model for milling wood or plastics. It is not recommended for precise metal milling, instead a minimum would be our SEAL Series due to its increased rigidity with an aluminium base plate. A vacuum cleaner connector is provided which can be adjusted between 1" and 1.75".
..
US$ 150.00
Model: VT2016-SEAL
Dimensions: 210.00mm x 160.00mm x 29.00mm
The vacuum table 4040 SEAL is a further development of its ST Series counterpart. A material of polyethylene plastic is sandwiched
between top and base plates of cast aluminium, giving the table additional rigidity. Although best results are achieved using a dedicated vacuum pump the SEAL series can be used with a..
US$ 180.00
Model: VT2012-R
Dimensions: 212.00mm x 132.00mm x 12.00mm
The 2012 R Series grid vacuum table is ready to use right away. Mount and connect your vacuum to the table using the
provided set of connecting hose.
Face milled from both sides and fit for use with coolant the R Series is ideal for engraving giving you the ability
to clamp and mill your workpieces quickly and ..
US$ 190.00
Model: VT2020-SEAL
Dimensions: 210.00mm x 200.00mm x 29.00mm
The vacuum table 2020 SEAL is a further development of its ST Series counterpart. A material of polyethylene plastic is sandwiched
between top and base plates of cast aluminium, giving the table additional rigidity. Although best results are achieved using a dedicated vacuum pump the SEAL series can be used with a..
US$ 190.00
Model: VT2616-SEAL
Dimensions: 270.00mm x 160.00mm x 29.00mm
The vacuum table 2616 SEAL is a further development of its ST Series counterpart. A material of polyethylene plastic is sandwiched
between top and base plates of cast aluminium, giving the table additional rigidity. Although best results are achieved using a dedicated vacuum pump the SEAL series can be used with a..
US$ 210.00
Popular
Model: VT3020-ST
Dimensions: 310.00mm x 200.00mm x 21.00mm
The 3020 ST vacuum table is a suitable beginner model for milling wood or plastics. It is not recommended for precise metal milling, instead a minimum would be our SEAL Series due to its increased rigidity with an aluminium base plate. A vacuum cleaner connector is provided which can be adjusted between 1" and 1.75".
..
US$ 210.00
Model: VT2012-GAL
Dimensions: 200.00mm x 120.00mm x 27.00mm
The 2012 GAL Series hole grid vacuum table is of vibration absorbing construction made from 100% cast aluminium.
Combined with high stability and switchable vacuum sections the GAL Series vacuum tables can be subdivided into several chambers.
The included holed rubber mat ensures a seal around your workpiece with a t..
US$ 220.00
Model: VT2012-RAL
Dimensions: 200.00mm x 120.00mm x 20.00mm
The 2012 RAL Series grid vacuum table is ready to use right away. Mount and connect your vacuum to the table using the set of connecting hose.
Face milled from both sides and fit for use with coolant the RAL Series features workpiece stop collars and makes clamping and milling your workpieces quick and easy.
..
US$ 220.00
Model: VT2020-R
Dimensions: 212.00mm x 212.00mm x 12.00mm
The 2020 R Series grid vacuum table is ready to use right away. Mount and connect your vacuum to the table using the
provided set of connecting hose.
Face milled from both sides and fit for use with coolant the R Series is ideal for engraving giving you the ability
to clamp and mill your workpieces quickly and ..
US$ 240.00
Popular
Model: VT3015-R
Dimensions: 312.00mm x 162.00mm x 12.00mm
The 3015 R Series grid vacuum table is ready to use right away. Mount and connect your vacuum to the table using the
provided set of connecting hose.
Face milled from both sides and fit for use with coolant the R Series is ideal for engraving giving you the ability
to clamp and mill your workpieces quickly and ..
US$ 240.00
Model: VT2012-GR
Dimensions: 216.00mm x 136.00mm x 27.00mm
The vacuum table 2012 GR excels in flexibility with gapless modularity. The inclusion of a 100 mm thread grid at it's suction surface, allows the attachment of clamps and vices without having to remove the table from your host machine.
Items includedItemQuantityVacuum manifold1Hole rubber mat (10 mm grid)1Rubber cover..
US$ 250.00
Popular
Model: VT2016-GAL
Dimensions: 200.00mm x 160.00mm x 27.00mm
The 2016 GAL Series hole grid vacuum table is of vibration absorbing construction made from 100% cast aluminium.
Combined with high stability and switchable vacuum sections the GAL Series vacuum tables can be subdivided into several chambers.The included holed rubber mat ensures a seal around your workpiece with a thr..
US$ 250.00
Popular
Model: VT4020-ST
Dimensions: 410.00mm x 200.00mm x 21.00mm
The 4020 ST vacuum table is a suitable beginner model for milling wood or plastics. It is not recommended for precise metal milling, instead a minimum would be our SEAL Series due to its increased rigidity with an aluminium base plate. A vacuum cleaner connector is provided which can be adjusted between 1" and 1.75".
..
US$ 250.00